The heat shrink tube has the characteristics of moisture-proof, wear-resistant and leak-proof, corrosion resistance, UV resistance, glass state at room temperature, high temperature heating shrinkage into close to rubber state, insulation and flame retardant.

Mainly used in home appliance wiring harness, automobile wiring harness, electronic equipment, ship, aerospace, power plant, distribution station, generator motor, machine tool equipment, submersible pump and other fields.

Before purchase, you need to understand the diameter of the cable, the use of the cable site, the access voltage of the cable, etc., but also understand the performance of the heat shrink tube, such as: the shrinkage ratio of the heat shrink tube, the heat value of the heat shrink tube, the insulation paper of the heat shrink tube and other parameters, and choose the appropriate size.

Generally, a heat shrink tube slightly larger than the diameter of the cable is used. First, it is easy to put the cable into the heat shrink tube. Second, it is better sealing.

Before using the heat shrink pipe, check the burrs and sharp corners on the cable to prevent cracking of the heat shrink pipe during shrinkage. Do not have oil and impurities in the cable connection place to prevent easy falling off after shrinkage and bubbles, resulting in poor sealing and electrical leakage.

Calculate the package length and cut the corresponding length. When cutting the tube, the incision should be smooth and smooth, without burrs and cracks, and avoid splitting along the cracks when heating and shrinking. Therefore, the disadvantages of artificial heat shrink tube cutting are slow speed, large length deviation, and more or less unnecessary trouble and waste caused by cutting quantity.

The heat shrink tube cutting machine adopts microcomputer numerical control display device, cutting length/quantity, feeding speed is freely set, and the adjustable roller feeding mechanism is installed, the pressure and lifting are automatically adjusted on both sides, and the material can be quickly released, and the thimble feeding mechanism is used to effectively prevent material scratches, the use of special tools, and the 86 stepping motor feeding, the cutting accuracy is as high as 0.1mm.

The use of heat shrink pipe cutting machine can not only improve production efficiency and reduce unnecessary waste, but also solve the problem of uneven/smooth cutting.

Our Heat Shrink Tube Cutting Machine can not only heat shrink pipe but also cut glass fiber pipe, yellow wax pipe, silicone pipe, rubber pipe, PVC pipe, teflon sleeve, heat shrink sleeve, computer wiring and so on.